Mounted to roof rafters
Adjustable 14 cm arm allows installation under various tiles
Pressed manufacturing ensures smooth edges
Installation requires wood screws (e.g., M8x120) and M10x20 bolts with nuts
Optional use of S-type support bracket
There are 10 products.
Mounted to roof rafters
Adjustable 14 cm arm allows installation under various tiles
Pressed manufacturing ensures smooth edges
Installation requires wood screws (e.g., M8x120) and M10x20 bolts with nuts
Optional use of S-type support bracket
For 40×40 mm square profiles
Connector length: 100 mm
Internal dimensions: 40×20 mm
Wall thickness: 3 mm
Material: aluminium (corrosion-resistant)
Fasteners: stainless steel
UV and weather resistant
- Maximum power: 500 W
- Efficiency: 22.5%
- Dimensions: 1961 × 1134 × 30 mm
- Weight: 26.5 kg
- Cell technology: N-Type mono
- Design: bifacial, dual glass
- Temperature coefficient: Pmax -0.29%/°C, Voc -0.28%/°C
- Open circuit voltage (Voc): 40.10 V
- Short circuit current (Isc): 15.86 A
- Frame thickness: 30 mm
✅ Tilt angle: 15°
✅ Panel orientation: vertical
✅ Dimensions: 1670 × 1280 × 370 mm
✅ Bolt: hex bolt M10 × 20
✅ Nut: flange nut M10
✅ Material: aluminum
✅ Profile (angle bar): 40 × 40 × 3 mm
Length: 1200 mm
Cross-section: 40 × 40 mm
Material: aluminum
Weight: 0.80 kg/m
Top channel: sliding slot M8 / M8 square nut
Bottom channel: hex bolt M10
✅ Battery chemistry: LiFePO₄
✅ Capacity: 100 Ah
✅ Nominal voltage: 51.2 V
✅ Nominal energy: 5.12 kWh
✅ Usable energy: 4.6 kWh
✅ System type: low-voltage (LV)
✅ Dimensions: 436 × 650 × 160 mm
✅ Weight: approx. 45 kg
✅ Installation: wall-mounted
✅ Compatibility: DEYE inverters
Polski
Deutsch
