- Structural element for: metal roof tiles.
- Stainless steel double thread with a set of nuts and an EPDM gasket.
- Total length: 250 mm
- Screw depth: 80 mm
- Adapter dimensions: 80 x 30 x 4 mm
- Smooth transition between threads: 20 mm
Home
Popular Products
- Designed for fastening mounting rails to rafter elements on roofs covered with plain tiles (plain tile roof).
- Made of 2 mm thick stainless steel
- Dimensions: 240 x 150 mm
- The use of this hook does not require cutting or grinding roof tiles, which shortens installation time
There are 34 products.
✅ Plug & Play – quick setup in 30 minutes
✅ Fire suppression response in 5 seconds
✅ Scalable – up to 12 units (92 kWh)
✅ Cross-module compatibility up to 3 years
- Maximum power: 500 W
- Efficiency: 22.5%
- Dimensions: 1961 × 1134 × 30 mm
- Weight: 26.5 kg
- Cell technology: N-Type mono
- Design: bifacial, dual glass
- Temperature coefficient: Pmax -0.29%/°C, Voc -0.28%/°C
- Open circuit voltage (Voc): 40.10 V
- Short circuit current (Isc): 15.86 A
- Frame thickness: 30 mm
- Key for unlocking connectors in installations with Hoymiles HMT three-phase microinverters
- Using the original key guarantees safe unlocking of the connector without damage!
- Key for unlocking connectors in installations with Hoymiles HMT three-phase microinverters
- Using the original key guarantees safe unlocking of the connector without damage!
Male Cable Connector – used for connecting Hoymiles microinverters, forming a network.
- Outer cable diameter: 10 ~ 13 mm
- Conductor size: 2.5 / 4.0 mm² or 14 / 12 AWG
- Compatible with microinverters: Hoymiles HM series
- T-AC Connector with 3 m Cable
- It is an important component to which the HMT microinverter is connected.
- The T-Connector already has a three-phase AC cable (12AWG) installed.
- The last branch must be sealed using an end cap!
- To open it, special dedicated keys must be used.
- End cap is essential: to close the circuit at the end of the installation chain
- The circuit must not be opened!
- Compatible with microinverters: Hoymiles HMT
- Prevents moisture ingress into the tee, which can lead to premature connector degradation
- End cap type: female, socket
- End cap is essential: to close the circuit at the end of the installation chain
- The circuit must not be opened!
- Compatible with microinverters: Hoymiles HMS
- Prevents moisture ingress into the tee, which can lead to premature connector degradation
✅ Plug & Play installation – cluster assembly in just 30 minutes
✅ Fire suppression response in under 5 seconds
✅ Expandable up to 12 modules (up to 92 kWh)
✅ Mix-and-match compatibility for 3 years
✅ Built-in Wi-Fi with OTA updates
✅ 10-year warranty / zero capacity loss for 3 years
✅ LiFePO4 technology – safe and durable energy storage
✅ Advanced BMS – full protection and smart management
✅ Scalable design – expandable up to 6 modules
✅ High efficiency – over 6000 charge cycles
✅ IP55 protection – suitable for indoor and outdoor use
✅ Lightweight and compact – only 40 kg
✅ Maximum efficiency: 96.5%
✅ Recommended maximum DC power: 600 W
✅ Rated output power: 450 W
✅ Maximum DC voltage: 65 V
✅ Start voltage: 22 V
✅ MPPT voltage range: 16–60 V DC
✅ Number of MPPT points: 1
- Communication: Wireless WiFi
- Compatible with microinverters:Hoymiles HMT and HMS series
- Distance / range: 400 meters
- Power consumption: typically 1.5W / maximum 3.0W

