- Application: Flat roof – ballast mounting structure (non-invasive installation)
- Material: Aluminium + polyethylene
- Dimensions: 425 x 80 x 395 mm
Home
Popular Products
Mounted to roof rafters
Adjustable 14 cm arm allows installation under various tiles
Pressed manufacturing ensures smooth edges
Installation requires wood screws (e.g., M8x120) and M10x20 bolts with nuts
Optional use of S-type support bracket
- Height: 30 mm
- Length: 50 mm
- Hole: M8
- Material: Aluminium
- Colour: Black
There are 40 products.
Heating capacity: 12 kW
Type: Air-to-water, Split, 3-phase
Refrigerant: R410A
Max. water temperature: 57°C
Efficiency class: A+++ (SCOP up to 4.45)
Operating range: –25°C to +35°C
- Key for unlocking connectors in installations with Hoymiles HMT three-phase microinverters
- Using the original key guarantees safe unlocking of the connector without damage!
- Key for unlocking connectors in installations with Hoymiles HMT three-phase microinverters
- Using the original key guarantees safe unlocking of the connector without damage!
- Protection class: Type 1+2
- Mounting: DIN rail 35 mm
- Max. PV voltage: 1200 V DC
- Short-circuit withstand: 10 kA
- Protection degree: IP20
- Operating temperature: -40°C ~ +80°C
Male Cable Connector – used for connecting Hoymiles microinverters, forming a network.
- Outer cable diameter: 10 ~ 13 mm
- Conductor size: 2.5 / 4.0 mm² or 14 / 12 AWG
- Compatible with microinverters: Hoymiles HM series
- Protection class: Type 2
- Mounting: DIN rail 35 mm
- Max. PV voltage: 1000 V DC
- Short-circuit withstand: 10 kA
- Protection degree: IP20
- Operating temperature: -40°C ~ +80°C
- Protection class: Type 2
- Mounting method: DIN rail 35 mm
- Rated voltage AC: 230 V
- Maximum continuous operating voltage AC: 275 V
- Degree of protection: IP20
- Operating temperature range: -40°C to +80°C
- T-AC Connector with 3 m Cable
- It is an important component to which the HMT microinverter is connected.
- The T-Connector already has a three-phase AC cable (12AWG) installed.
- The last branch must be sealed using an end cap!
- To open it, special dedicated keys must be used.
✅ Safety - Advanced BMS – LiFePO4 technology
✅ Easy Installation - Ground-mounted design
✅ Compatibility - Works with most low-voltage inverters available on the market
✅ Local Service - Service and technical support in Poland
✅ Single Module Capacity - 15.36 kWh, prismatic "A" grade cells
✅ Scalability - Parallel connection of modules up to 245 kWh
✅ Performance - High charge and discharge current
- End cap is essential: to close the circuit at the end of the installation chain
- The circuit must not be opened!
- Compatible with microinverters: Hoymiles HMT
- Prevents moisture ingress into the tee, which can lead to premature connector degradation
- Protection Class: TYP 1+2
- Mounting Method: DIN 35 mm mounting rail
- Rated AC Voltage: 230 V
- Maximum Continuous AC Voltage: 255 V
- Protection Degree: IP 20
- Operating Temperature Range: -40°C / +80°C
- Impulse Current: 12.5 kA
- End cap type: female, socket
- End cap is essential: to close the circuit at the end of the installation chain
- The circuit must not be opened!
- Compatible with microinverters: Hoymiles HMS
- Prevents moisture ingress into the tee, which can lead to premature connector degradation

