Polski
Deutsch
Availability:
1399 In Stock
Welcome to the MK Team store!
Home
Popular Products
Availability:
192 In Stock
- Designed for fastening mounting rails to rafter elements on roofs covered with plain tiles (plain tile roof).
- Made of 2 mm thick stainless steel
- Dimensions: 240 x 150 mm
- The use of this hook does not require cutting or grinding roof tiles, which shortens installation time
Availability:
187 In Stock
- Application: Flat roof – ballast mounting structure (non-invasive installation)
- Material: Aluminium + polyethylene
- Dimensions: 425 x 80 x 187 mm
There are 42 products.
Availability:
2 In Stock
✅ Plug & Play – quick setup in 30 minutes
✅ Fire suppression response in 5 seconds
✅ Scalable – up to 12 units (92 kWh)
✅ Cross-module compatibility up to 3 years
Availability:
19 In Stock
- Protection class: TYPE 2
- Mounting method: 35 mm DIN mounting rail
- Rated operating voltage: 1000 V
- Max. current: 40 kA
- Protection rating: IP 20
- Operating temperature range: -30°C / +50°C
Availability:
41 In Stock
- Protection class: TYPE 1+2
- Mounting method: DIN rail 35 mm
- Rated voltage AC: 230 V
- Maximum continuous operating voltage AC: 275 V
- Degree of protection: IP 20
- Operating temperature range: -30°C / +50°C
Availability:
20 In Stock
- Protection class: TYPE 1+2
- Mounting method: DIN rail 35 mm
- Rated operating voltage: 1000 V
- Maximum operating voltage: 1060 V DC
- Degree of protection: IP20
- Operating temperature range: -30°C / +50°C
Availability:
1 In Stock
- Key for unlocking connectors in installations with Hoymiles HMT three-phase microinverters
- Using the original key guarantees safe unlocking of the connector without damage!
Availability:
183 In Stock
- Rated current: 32 A
- Number of poles: 2P
- Fuse link size: 10 x 38 mm
- Terminal capacity: 0.5–10 mm²
- Mounting method: DIN rail 35 mm
- Rated voltage (Un): 1000 V DC
- Number of modules: 2
Availability:
7 In Stock
- Key for unlocking connectors in installations with Hoymiles HMT three-phase microinverters
- Using the original key guarantees safe unlocking of the connector without damage!
Availability:
Out of stock
Male Cable Connector – used for connecting Hoymiles microinverters, forming a network.
- Outer cable diameter: 10 ～ 13 mm
- Conductor size: 2.5 / 4.0 mm² or 14 / 12 AWG
- Compatible with microinverters: Hoymiles HM series
Availability:
Out of stock
- T-AC Connector with 3 m Cable
- It is an important component to which the HMT microinverter is connected.
- The T-Connector already has a three-phase AC cable (12AWG) installed.
- The last branch must be sealed using an end cap!
- To open it, special dedicated keys must be used.
Availability:
86 In Stock
- Rated current: 15 A
- Rated voltage: 1000 V DC
- Characteristic: time-delay (slow blow)
- Dimensions: 10 × 38 mm
- Operating temperature: -40 ~ +90 °C
- Standard: IEC60269
Availability:
9 In Stock
- End cap is essential: to close the circuit at the end of the installation chain
- The circuit must not be opened!
- Compatible with microinverters: Hoymiles HMT
- Prevents moisture ingress into the tee, which can lead to premature connector degradation
Availability:
98 In Stock
- Rated current: 16 A
- Rated voltage: 1000 V DC
- Characteristic: time-delay (slow blow)
- Dimensions: 10 × 38 mm
- Operating temperature: -40 ~ +90 °C
- Standard: IEC60269