- Structural element for: metal roof tiles.
- Stainless steel double thread with a set of nuts and an EPDM gasket.
- Total length: 300 mm
- Screw depth: 80 mm
- Adapter dimensions: 80 x 30 x 4 mm
- Smooth transition between threads: 20 mm
Home
Popular Products
- Width: 90 mm
- Material: Stainless steel
- Application: For mounting structures on standing seam metal roofs
- Material: Stainless steel
- Dimensions [mm]: 230 x 30 x 4
- Suitable roof types: Bitumen shingles, roofing felt
- Mounting method: Screwed to decking / board
There are 64 products.
Active filters
- AC Voltage Range: 342VAC-440VAC
- Rated Voltage: 220VAC/230VAC
- Rated Frequency: 50Hz/60Hz
- Maximum Power: 3.3kVA
- Maximum Current: 15.2A
- Switching Time: <3s
-
Max efficiency: 98.6%
-
Maximum recommended DC power: 12,000 W
-
Rated output power: 8000 W
-
Maximum DC voltage: 600 V
-
Start-up voltage: 140 V
-
MPPT voltage range: 140–1000 V DC
-
MPPT range at full load: 300–850 V DC
-
Number of MPPT trackers: 2
Male Cable Connector – used for connecting Hoymiles microinverters, forming a network.
- Outer cable diameter: 10 ~ 13 mm
- Conductor size: 2.5 / 4.0 mm² or 14 / 12 AWG
- Compatible with microinverters: Hoymiles HM series
-
Maximum efficiency: 97.4%
-
Maximum recommended DC power: 4950 W
-
Rated output power: 3300 W
-
Maximum DC voltage: 500 V
-
Start-up voltage: 60 V
-
MPPT voltage range: 50–480 V DC
-
Number of MPPTs: 1
-
Number of MPPT inputs: 1
- T-AC Connector with 3 m Cable
- It is an important component to which the HMT microinverter is connected.
- The T-Connector already has a three-phase AC cable (12AWG) installed.
- The last branch must be sealed using an end cap!
- To open it, special dedicated keys must be used.
✅ Safety - Advanced BMS – LiFePO4 technology
✅ Easy Installation - Ground-mounted design
✅ Compatibility - Works with most low-voltage inverters available on the market
✅ Local Service - Service and technical support in Poland
✅ Single Module Capacity - 15.36 kWh, prismatic "A" grade cells
✅ Scalability - Parallel connection of modules up to 245 kWh
✅ Performance - High charge and discharge current
- Rated current: 15 A
- Rated voltage: 1000 V DC
- Characteristic: time-delay (slow blow)
- Dimensions: 10 × 38 mm
- Operating temperature: -40 ~ +90 °C
- Standard: IEC60269
- Number of strings: 4
- Number of poles: 8
- Maximum voltage per string (Vdc): 1500
- Maximum current per string (A): 25
- Operating voltage: 100Vac~270Vac
- Operating temperature range: -20°C – +50°C
- End cap is essential: to close the circuit at the end of the installation chain
- The circuit must not be opened!
- Compatible with microinverters: Hoymiles HMT
- Prevents moisture ingress into the tee, which can lead to premature connector degradation
- Rated current: 16 A
- Rated voltage: 1000 V DC
- Characteristic: time-delay (slow blow)
- Dimensions: 10 × 38 mm
- Operating temperature: -40 ~ +90 °C
- Standard: IEC60269
- End cap type: female, socket
- End cap is essential: to close the circuit at the end of the installation chain
- The circuit must not be opened!
- Compatible with microinverters: Hoymiles HMS
- Prevents moisture ingress into the tee, which can lead to premature connector degradation
Number of strings: 4
Current per string: 50 A
Rated current: 30 mA
Chain voltage: 300–1500 V DC
Operating voltage: 100–270 V AC
Rated voltage: 230 V AC
Protection rating: IP66
Protection class: II

